Not sure I can post this here, so I am asking lodos if I can. I am going to make it broad until I hear from lodos...I am needing a WD logic board for a 4 TB, 6TB, and 8TB drive.... These are fairly new drives...

WD Black 4TB WD4005FZBX
WD Black 6TB WD6003FZBX
WD Red 8TB WD80EFAX

All three have board #0B36136 C13811. The board number does not have to be the same, but if all else fails I might can change Bios chip if the board numbers are a match. They need to match the picture except the broken and bent places, lol.

Any suggestions to fix the dent on the 2 TB drive?

Leave the post here. Edit the above with the model number of the drives and boards you need.
I’d offer to help but for my personal work I’ve moved to SSDs and only stock and use seagate mechanicals.
Your asking, not selling. I’ll let it go.

Also don’t post any reasoning. I know from the logs a few companies actually visit here. Not them (that I can tell). But some do.

_________________
42 6F 61 72 64 73 6F 72 74 2E 63 6F 6D

Give me a week or two I'll probably be able to find a matching board.

I have close to a thousand different hard drives available but none are in an order. It'll take time to cycle through them.

Next time I go to BS, I'll ask the owners if they have one on hand or a capable scrap drive I can find that works.

I'll buy it if so, but you'll have to cover my costs for yourself.

Sounds good. I need 3 if you or they or anyone has them. You can email me at sarnett37150 residing at google.

Anyone ran across one of these boards?